Part Number:308 0.29M³ ROCK BUCKET
Bucket excavator is a kind of excavator.
Its main device is the bucket, which belongs to a working device on the hook machine. It is a bucket-shaped component that directly contacts with the soil. To drive the bucket for excavation work.
It is divided into front shovel bucket and backhoe bucket excavator.
1.Standard type bucket:Q345B high-quality steel is used as the material, and domestic high-quality bucket teeth and tooth holders are used. This bucket is mainly used for light work environments such as earth excavation and sand, soil gravel, and loading.
2. Reinforced bucket: Q345B high-quality steel is used as the material. The side edge plate and tooth seat plate of the bucket are relatively thickened. The bucket uses domestic high-quality bucket teeth and tooth seats to prolong the service life. Soil, mixed with soft stones and soil, and soft stone loading and other light working environments.
3. Gravel type bucket: Q345B + NM360 + HARDOX500 high-quality steel is used as the material. The side edge plate and bottom reinforcement plate of the bucket are made of the best domestic NM360 steel, and the tooth seat plate is made of imported HARDOX500 steel. The stone bucket material has wear resistance and bending resistance. This bucket is mainly used for heavy-duty operations such as digging crushed stones, gravels, and hard stones mixed in the soil, and loading of secondary hard stones and weathered stones.
4. Rock-type bucket: the material is Q345B + HARDOX500 high wear-resistant steel. The side edge plate, tooth seat plate and bottom reinforcement plate of the bucket are imported HARDOX500 high wear-resistant steel. The bottom is added with a reinforcement plate and side protection The plate, the installation protective plate, and the bucket tooth seat are made of Korean sbic products specially used for rocks. Therefore, this bucket has strong wear resistance and bending resistance. This kind of rock bucket is mainly used for excavating rocks, blasting and so on.